ADVANTAGES
- Non-toxic
- Non-flammable
- Contains no phosphates, acids,
silicones and is non-butyl
- Safe to use on all kinds of
metals and plastics
- Biodegradable
- Easily removes oil, grease
and dirt from surfaces
- Fast, intense cleaning action
surpasses other cleaners' performances
- Removes unpleasant odors.
Has a clean fresh smell.
- Leaves cleaned surfaces slightly
anti-static
- Very economical to use
- Low VOC (3.5 g/L concentrate,
less than 1 g/L as used)
PROPERTIES
| NFPA Hazard
Class: |
Health 0 (as
used) |
|
Flammability
0 |
|
Reactivity 0 |
VOC: <1 g/L (as used)
pH: 12.9 (concentrate)
Flash point: None
STANDARDS
Meets European Community (EC)
directives concerning biological degradability of surface-active substances.
|
METHOD OF ACTION
- eOx
Oxygen cleaner penetrates the dirt, breaking surface tension, easily dissolving
organic substances and disintegrating many chemical compounds.
- The use of carbon chains
in this system makes this cleaning agent biodegradable. The chemical reactions
that take place when using
eOx
Oxygen Cleaner completely disintegrate these linear carbon chains.
- Both cationic and non-ionic
reducing agents are used, allowing
eOx
Oxygen Cleaner to work very efficiently at low temperatures. The concentrate's
high pH (12.9) is partly caused by the cationic ingredients. This pH allows
eOx
Oxygen Cleaner to clean solid washable surfaces without marring the substrate.
- The non-ionic ingredient increases
the product's penetration into the dirt. It also decreases the static attraction
of the dirt to the substrate by encasing the dirt particles, preventing them
from attaching to the surface.
- Oil-based products are
decomposed by
eOx
Oxygen Cleaner. It separates the oily substance into its water soluble and
organic components, making easy removal from the substrate possible.
- eOx
Oxygen Cleaner contains no phosphates. The cationic and non-ionic ingredients
work well in hard water since they are not sensitive to Calcium or Magnesium
ions.
|
NOTES FOR USING
eOx
Oxygen Cleaner
- Whatever system is used
for cleaning with
eOx
Oxygen Cleaner, a mechanical action (brush, sponge, aeration of solution, ultrasonic,
etc.) is required to break the surface tension of the dirt. Just soaking for an
extended time will not be sufficient for cleaning.
eOx
Oxygen Cleaner may be safely used in cleaning fountains, immersion or ultrasonic
baths, parts washers, high-pressure cleaners, and other industrial cleaning machines
eOx
Oxygen Cleaner is not flammable and can be safely heated. For immersion or ultrasonic
baths we recommend 50° C/122° F to minimize the evaporation rate.
eOx
Oxygen Cleaner is highly concentrated. If the product is not sufficiently diluted,
a white haze or stripes can be left after drying especially on very smooth or
shiny surfaces. This haze will disappear when the surface is treated again with
the correct dilution.
Rinsing all parts, pipes and surfaces
is important so no residue remains. Rinsing with warm water is not necessary but
will enhance the drying process.
|
|
