• Non-Toxic
• Non-Flammable
• Contains no phosphates, acids, silicones and is non-butyl
• Safe to use on all surfaces including metal, plastic & rubber materials with no stock loss
• Biodegradable
• Easily removes oil, grease and dirt from surfaces
• Fast, intense cleaning action surpasses other cleaners' performances
• Cleaned surfaces become slightly anti-static and corrosion inhibitive for up to 4 weeks.
• Can be effectively used as a spray-on & wipe-off process
• Safe for use in high-pressure washers, immersion systems, ultrasonic machines and other industrial cleaning systems
• Very economical to use
• Low VOC (<0.2 g/L as used)

PROPERTIES

VOC: <0.2 g/L (as used)
pH: 12.8 (concentrate)
Flash point: None

STANDARDS

Meets European Community (EC) directives concerning biological degradability of surface-active substances.

• TRAMOS AC penetrates the dirt, breaking surface tension, easily dissolving organic substances and disintegrating many chemical compounds.
  
• The use of carbon chains in this system makes this cleaning agent biodegradable. The chemical reactions that take place when using TRAMOS AC completely disintegrate these linear carbon chains.
  
• Both cationic and non-ionic reducing agents are used, allowing TRAMOS AC to work very efficiently at low temperatures. The concentrate's high pH (12.8) is partly caused by the cationic ingredients. This pH allows TRAMOS  AC to clean solid washable surfaces without marring the substrate.
  
• The non-ionic ingredient increases the product's penetration into the dirt. It also decreases the static attraction of the dirt to the substrate by encasing the dirt particles, preventing them from attaching to the surface.
  
• TRAMOS AC decomposes oil-based products. It separates the oily substance into its water soluble and organic components, making easy removal from the substrate possible.

TRAMOS AC contains no phosphates. The cationic and non-ionic ingredients work well in hard water since they are not sensitive to Calcium or Magnesium ions.

• When applying TRAMOS AC with a spray applicator, start working from the bottom to the top to avoid getting stripes on the fuselage or other large surfaces.
• Work on limited areas so that product does not dry before rinsing.
• Whatever system is used for cleaning with TRAMOS  AC, a mechanical action (brush, sponge, aeration of solution, ultrasonic, etc.) is required to break the surface tension of the dirt. Just soaking for an extended time will not be sufficient for cleaning.
• After several cleanings, TRAMOS  AC will form an anti-static layer on the aircraft or other equipment. This layer helps prevent dirt from sticking to the surface, thereby making it easier to remove. Dilution can then be reduced up to 1:10.
• Warming TRAMOS AC accelerates the cleaning process.
• Circulation of the solution in a parts washer will enhance cleaning.
• Ultrasonic baths may accelerate cleaning time, but are not required.
• Contaminants may be precipitated or filtered out of TRAMOS AC product solution to facilitate disposal. The remaining TRAMOS AC may be reused provided pH continues to meet specifications.

Pictures of Fire Retardant removal using TRAMOS AC.
Pictures of a Flap Track Fairing on a Boeing 737 cleaned with TRAMOS AC.
Pictures of a Wheel Hubcap on a Boeing 737 cleaned with TRAMOS AC.
Pictures of a Engine Pylon on a Boeing 737 cleaned with TRAMOS AC.
Pictures of a Landing Gear Door on a Boeing 727 cleaned with TRAMOS AC.
Pictures of a inside of the Wheel Well on a Boeing 727 cleaned with TRAMOS AC.
Pictures of a surface aft of the Wheel Well on a Boeing 727 cleaned with TRAMOS AC.