TRAMOS Industrial is a concentrated product that can be used for the same cleaning and degreasing operations as TRAMOS Economic but has an added organic corrosion inhibitor, which protects metal surfaces for up to four weeks.

• Non-Toxic
• Non-Flammable
• Contains no phosphates, acids, silicones and is non-butyl
• Safe to use on all kinds of metals, plastics, lacquer paints, floors, walls, ceilings etc.
• Biodegradable
• Easily removes oil, grease and dirt from surfaces
• Fast, intense cleaning action surpasses other cleaners' performances
• Removes unpleasant odors. Has a clean fresh smell.
• Leaves cleaned surfaces slightly anti-static and corrosion resistant for up to 4 weeks.
• Safe to use in high-pressure spray equipment, part washers, dip tanks, or ultrasonic baths as well as standard industrial cleaning machines.
• Very economical to use

• Low VOC (3.5 g/L concentrate, less than 1 g/L as used)

PROPERTIES

VOC: < 1 g/L (as used)
pH: 12.9 (concentrate)
Flash point: None

STANDARDS

• Meets European Community (EC) directives concerning biological degradability of surface-active substances.

• TRAMOS Industrial penetrates the dirt, destroying the surface tension, easily dissolving organic substances and disintegrating many chemical compounds.

• The use of carbon chains in this system makes this cleaning agent completely biodegradable. The chemical reactions in TRAMOS  Industrial completely disintegrate these linear carbon chains.

• Both cationic and non-ionic reducing agents are used, allowing TRAMOS  Industrial to work very efficiently at low temperatures. The high pH-value (ca.12.9) is partly caused by the cationic ingredients. This pH allows TRAMOS  Industrial to clean solid washable surfaces without marring the substrate.

• TRAMOS  Industrial decomposes oil-based products. It separates oily substances into their water soluble and organic components, making easy removal from the substrate possible.

TRAMOS  Industrial contains no phosphates. The cationic and non-ionic ingredients work well in hard water since they are not sensitive to Calcium or Magnesium ions.
  
 
  
  
  

NOTES FOR USING TRAMOS  Industrial

• Whatever system is used for cleaning with TRAMOS  Industrial, a mechanical action (brush, sponge, aeration of solution, ultrasonic, etc.) is required to break the surface tension of the dirt. Just soaking for an extended time will not be sufficient for cleaning.
• TRAMOS  Industrial may be safely used in cleaning fountains, immersion or ultrasonic baths, parts washers, high-pressure cleaners, and other industrial cleaning machines
• TRAMOS  Industrial is not flammable and can be safely heated. For immersion or ultrasonic baths we recommend 50° C/122° F to minimize the evaporation rate.
• TRAMOS  Industrial is highly concentrated. If the product is not sufficiently diluted, a white haze or stripes can be left after drying especially on very smooth or shiny surfaces. This haze will disappear when the surface is treated again with the correct dilution.
• Rinsing all parts, pipes and surfaces is important so no residue remains. Rinsing with warm water is not necessary but will enhance the drying process.
• TRAMOS  Industrial can be used in a "final cleaning" process to gain the corrosion inhibitive property after using another TRAMOS product.