RPM Technology, LLC - Authorized Distributor

TRAMOS^® AeroTech 2000

• Non-Toxic
• Non-Flammable
• Contains no phosphates, acids, silicones and is non-butyl
• Safe to use on all surfaces including metal, plastic & rubber materials with no stock loss
• Biodegradable
• Easily removes oil, grease and dirt from surfaces
• Fast, intense cleaning action surpasses other cleaners' performances
• Cleaned surfaces become slightly anti-static and corrosion inhibitive for 4 weeks
• Can be effectively used as a spray-on & wipe-off process
• Safe for use in high-pressure washers, immersion systems, ultrasonic machines and other industrial cleaning systems
• Very economical to use
• Low VOC (0.2 g/L as used)

PROPERTIES

VOC: 0.4 g/L
pH: 11.5
Flash point: None

STANDARDS

• Conforms to specification ARP 1755B for cleaning agents on aircraft engine materials.
• Conforms to specification ASTM F 519-97 TYPE 1A for Mechanical Hydrogen Embrittlement.
• Conforms to specification ASTM F 945-98
  on AMS 4911 alloy.

• TRAMOS AeroTech 2000 penetrates the dirt, breaking surface tension, easily dissolving organic substances and disintegrating many chemical compounds.
  
• The use of carbon chains in this system makes this cleaning agent biodegradable. The chemical reactions that take place when using TRAMOS AeroTech 2000 completely disintegrate these linear carbon chains.
  
• Both cationic and non-ionic reducing agents are used, allowing TRAMOS AeroTech 2000 to work very efficiently at low temperatures. The concentrate’s high pH (12.5) is partly caused by the cationic ingredients. This pH allows TRAMOS AeroTech 2000 to clean solid washable surfaces without marring the substrate.
  
• The non-ionic ingredient increases the product’s penetration into the dirt. It also decreases the static attraction of the dirt to the substrate by encasing the dirt particles, preventing them from attaching to the surface.
  
• TRAMOS AeroTech 2000 decomposes oil-based products. It separates the oily substance into its water soluble and organic components, making easy removal from the substrate possible.

• TRAMOS AeroTech 2000 contains no phosphates. The cationic and non-ionic ingredients work well in hard water since they are not sensitive to Calcium or Magnesium ions. 
       
       
         
        
            
       

• Whatever system is used for cleaning with TRAMOS Aerotech 2000, a mechanical action (brush, sponge, aeration of solution, ultrasonic, etc.) is required to break the surface tension of the dirt. Just soaking for an extended time will not be sufficient for cleaning.
  
• After several cleanings, TRAMOS Aerotech 2000 will form an anti-static layer on the aircraft or other equipment. This layer helps prevent dirt from sticking to the surface, thereby making it easier to remove.
  
• TRAMOS Aerotech 2000 is ready to use but can be diluted up to 1:1 with water.
  
• Warming TRAMOS Aerotech 2000 accelerates the cleaning process.
  
• Circulation of the solution in a parts washer will enhance cleaning.
  
• Ultrasonic baths may accelerate cleaning time, but are not required.
  
• Contaminants may be precipitated or filtered out of TRAMOS Aerotech 2000 product solution to facilitate disposal. The remaining TRAMOS Aerotech 2000 may be reused provided pH continues to meet specifications.

TRAMOS Oxygen Cleaner - For tubing and valves used in an oxygen-enriched environments