RPM Technology, LLC

  Home > PolyGone  > 

PolyGone™
High-Performance Emulsifier / Stripping Agents
 

PolyGone™ stripping agents are unique formulations that remove polysulfide (PRC) and silicone RTV sealants from metal, ceramic, and some plastic substrates.  The top polysulfide producers include PRC DeSoto (now PPG), AC Tech, and Flamemaster.  The top silicone producers are GE, Dow, and Wacker.  Both polysulfide (polysulphide) and silicone RTV are difficult to remove completely since they actually bond into surface/substrate. 

The typically, sealant removal method requires scraping that results in damaging the substrate.  There are also products  that try to "disslove" the sealants but due to their inertness, this does not work.  PolyGone however,   reacts with the polymers chemically and breaks them down so they can be rinsed away without damage to the surface/substrate.  This offers significant advantages over other removal methods.  PolyGone emulsifiers are specialty blended chemistries that wet and penetrate the polymer and relatively quickly emulsify it.  This emulsification prevents redeposition of the reaction by-products and allow for water rinsing.

The polysulfide (polysulphide) sealant remover is also available as a gel for use in vertical, inverted and non-immersion applications. PolyGone is effective at removing silicone RTV and polysulfide (polysulphide) sealants at room temperature, are fast acting and environmentally friendly as opposed to regularly used solvents.  PolyGone is currently being used by several MRO organizations as a sealant remover.  Visit our Photo Gallery

PolyGone 310-AG is our improved formulation of our successful PolyGone 300-AG.  PolyGone 310-AG was tested and approved by NavAir and the US Air Force for use on their aircraft.

 

PolyGone™ 300-AG Aviation Grade Polysulfide Stripper - DISCONTINUED; See PolyGone 310-AG
PolyGone™ 300-AG Gel Gelled Aviation Grade Polysulfide Stripper - DISCONTINUED; See PolyGone 310-AG
PolyGone™ 310-AG Inst. PolyGone Application Instructions
PolyGone 305 Industrial/Marine Grade Polysulfide Stripper
PolyGone 305 MSDS for PolyGone 305
PolyGone 305 Gel Gelled Insdustrial/Marine Grade Polysulfide Stripper
PolyGone 305 MSDS for PolyGone 305 Gel
PolyGone310-AG Aviation Grade Polysulfide Stripper
PolyGone310-AG MSDS MSDS for PolyGone 310-AG
PolyGone310-AG Gel Aviation Grade Polysulfide Stripper
PolyGone310-AG Gel MSDS MSDS for PolyGone 310-AG Gel
PolyGone™ 500 Silicone Stripper - DISCONTINUED; See PolyGone 505
PolyGone 505 Silicone Stripper
PolyGone™ 500-AG Aviation Grade Silicone Stripper - DISCONTINUED; See PolyGone 505
PolyGone™ 535 Silicone Stripper - DISCONTINUED contact RPM for recommendations

 

Go to Photo Gallery

Additional application instructions for PolyGone™ 310-AG

Recommended by:      Mooney Service by:

    Advanced Aircraft, LLC               

                                          503-465-2298                                     320-295-1671

 

Available in the U.S. & Canada through:

                     

Product Codes                    Product Codes

Available in Europe through:

 

Available in Australia & New Zealand through:

                   

Product Codes                    Product Codes

 

For more information or to order PolyGone products, contact RPM Technology, LLC

Date issued: 06/12