RPM Technology, LLC

  Home > PolyGone  >  PolyGone 500-AG


PolyGone 500-AG
Aviation Grade Silicone
Emulsifier

DESCRIPTION:  PolyGone 500-AG is a high performance Aviation Grade sealant emulsifier designed to remove industrial silicone, novalak resin, rosin, acrylics, and other sealants from a variety of surfaces except for many composites.

 

CHEMISTRY:  PolyGone 500-AG is a proprietary formulation designed to penetrate, break down, and emulsify tenacious sealants.  Once broken down, the sealant is suspended to prevent redeposition and enable easy rinsing.

 

APPLICATION: PolyGone 500-AG is intended for use at room temperature (68F-80F).  It may be continuously sprayed or used in immersion-based cleaning systems.  Heat (120F/49C) and/or agitation, including ultrasonic, is not necessary but significantly enhances performance.  The agitation removes the digested sealant and exposes underlying layers to fresh PolyGone 500-AG.  However, do not use a sparging system, as this will quickly deactivate the emulsifier.  PolyGone 500-AG must be used at full strength.  Dilution and/or excessive heat, above 120F will deteriorate the emulsifier.  RPM Technology recommends using PolyGone 500-AG in a well-ventilated area and in a covered cleaning apparatus to prevent product evaporation.

 

RINSE: PolyGone 500-AG is water-soluble.  Although water may be used to rinse the product, rinsing with a low surfactanated emulsifier such as eOxS, also available from RPM Technology, followed by pure water will improve removal of all residues.  An emulsifier will improve rinsing via a sheeting effect, reduce sealant redeposition, and reduce water usage.  In cases where water is not preferred, a compatible solvent such as IPA or acetone may be used.

 

COMPATIBILITY:  PolyGone 500-AG is compatible with most metals.  The formulation is non-ionic and non-reactive.  Metals such as Cu, Fe, Zn, and Ti have been tested with PolyGone 500-AG with no detected metal loss.  However, PolyGone 500-AG does react with aluminum on the micro-scale along with many types of polymers and plastics.  Extensive soaking (>14 hours) is not recommended.  Polyvinyl chloride (PVC), polyvinyl alcohol, and similar plastics should not be treated with PolyGone 500-AG.  Many elastomers are also not recommended.  RPM Technology recommends the following plastics for application and storage, Polypropylene, Poly Olefin, Polyethylene (low and high density), Teflon, and Butyl Rubber.  Testing is necessary to demonstrate full compatibility.

 

PPE: Recommend personal protective equipment (PPE) includes safety glasses/goggles and nitryl or butyl rubber gloves.  Aprons may be used to protect clothing.  Do not use gloves made from latex or vinyl.

 

TOXICITY: PolyGone 500-AG contains a blend of polar organics.  PolyGone 500-AG has a low inherent toxicity and at diluted levels, is essentially non-toxic to aquatic life.  The material is readily biodegradable and does not bioaccumulate.

 

STORAGE: PolyGone 500-AG must be stored in a cool and dry environment away from light and incompatible materials.  The recommended storage temperature is between 50F-80F (10C-27C).  Under these conditions, unopened containers of PolyGone 500-AG have a 1-year shelf life.

 

DISPOSAL:  PolyGone contains no halogenated, reactive, or other EPA regulated components.  Conformance with Federal, State, and Local disposal regulations is required.  Diluted PolyGone can be disposed of by discharge to a sewage treatment plant with prior approval.  Used PolyGone may need to be disposed of as organic solvent waste depending on the sealants and contaminates removed.  PolyGone has a high BTU value and waste can be managed through a fuels-blending program.

 

AVAILABILITY: PolyGone 500-AG is available in individual poly gallons, 4x1 gallon cases, 55-gallon poly drums, and wipes.

 

Technical Data Sheet for PolyGone 500-AG

MSDS for PolyGone 500-AG

For more information or to order PolyGone products, contact RPM Technology, LLC

ATTENTION - Documents with a are stored in PDF format. In order to view and print them, you must have the FREE Adobe Acrobat Reader which is available by clicking the icon on this page.

Date issued: 05/08