What is happening at RPM Technology, LLC
Updated: 6/29/09
10/09: RPM Technology to exhibit at
the 62nd annual NBAA Convention in Orlando, FL from Tuesday,
October 20th to Thursday, October 22nd .
04/09: RPM
Technology to exhibit at the 14th annual MRO Show in Dallas, TX
from Tuesday, April 21st to Thursday, April 23rd,
booth number 1907.
04/09: Cessna Aircraft, a Textron
Company, approved the use of PolyGone 300-AG for use on their
aircraft.
12/08: Twin Commander approves the use of PolyGone 300-AG Gel for bulkhead inspection sealant removal. Ask about SL 382 & SL 383.
12/08: RPM Technology begins supplying aviation products to Aviall directly. The products included are PolyGone 30-AG, eOx and PolyWipes. Click for Aviall product codes.
10/08: RPM Technology to exhibit at the 61st annual NBAA Show in Orlando, FL from Monday, October 6th to Wednesday, October 8th, booth number 3919.
04/08: RPM Technology exhibited at the 13th annual MRO Show in Ft. Lauderdale, FL.
03/08: RPM Technology's PolyGone 300-AG Gel featured in the March edition of the Cessna Pilots Association magazine. Click here to view the article. The article was written by Paul New from Tennessee Aircraft Services, Inc.
11/07: PolyGone listed on Bell Helicopter specification MV-1951.
10/07: RPM Technology's PolyGone and eOx lines are now available from API throughout the US and Canada.
10/07: RPM Technology began selling the eOx line of cleaners and degreasers in the United States. This line of environmentally friendly products has been used in Europe for years and is now available in the US.
09/07: RPM Technology exhibited at the 60th annual NBAA Convention in Atlanta, GA.
08/07: RPM Technology's PolyGone and eOx lines are now available from Aviall throughout the US, Canada, Australia and New Zealand.
06/07: RPM Technology exhibited at the Bombardier CRJ World Wide Operator's Conference in Montreal, Canada from June 12-14th.
04/07: RPM Technology exhibited at the 12th annual MRO Show in Atlanta, GA.
01/07: Rolls-Royce added 3 RPM Technology products to their OMat List: PolyGone 300-AG as 1/286C, PolyGone 500-AG as 1/286D, and PolyWipes as 1/287C.
10/06: RPM Technology exhibited at the 59th annual NBAA Convention in Orlando, FL.
10/06: Digesil NC Concentrate is recommended by Struers for removal of residues of cured RepliSet or RepliFix two-part silicone rubber for replicating surfaces.
08/06: RPM Technology's PolyGone 300-AG was approved by Bombardier in SRM-51-23-00 for use on the CRJ200 for Pressure, Environmental, Fuel Tank, and Firewall Sealant Removal.
04/06: RPM
Technology exhibited at the 11th annual MRO Show in Phoenix,
AZ.<![if
!vml]>
<![endif]>
02/06: RPM Technology entered into a distribution agreement with A.C. Tech to distribute RPM Technology's products to the aviation and industrial markets. A.C. Tech has locations in Garden Grove, CA; St. Louis, MO; Atlanta, GA; and Montgomery (Houston), TX.
12/05: RPM Technology entered into a distribution agreement with Aviochem to distribute RPM Technology's products to the aviation and industrial markets in Europe. Aviochem is located in Montirone, Italy.
12/05: RPM Technology, LLC obtained a CAGE number for facilitating business with government contractors. Our CAGE number is 48AB0.
11/05: RPM Technology entered into a distribution agreement with Graco Supply Company to distribute RPM Technology's products to the aviation and industrial markets. Graco Supply has locations in Ft. Worth, TX and Wichita, KS.
10/05: RPM Technology presented "Silicone Contamination Removal Prior to Painting" at the fall SAE G8 & G9 Conference in Albuquerque, NM.
09/05: RPM Technology entered into an agreement to become the exclusive North American distributor for Chela, Ltd. Chela is a manufacturer of silicone and polysulfide removal chemistry.
04/05: RPM Technology exhibited at the 10th Anniversary of MRO in Dallas, TX from Wednesday April 20th to Thursday April 21st.
04/05: PolyGone 300-AG Gel used to remove polysulfide from aft pressure bulkhead on Beech King Air B-200 for mandatory inspection.
01/05: RPM entered into an agreement with Godax Laboratories, Inc. to become their exclusive supplier of Nochromix glass cleaner to all international (non-U.S.) customers.
01/05: RPM Technology introduces a larger size, 5-pound, container for its PolyGone 300-AG Gel. This size is perfect for removing the sealant from one tank on a Mooney C-model.
11/04: The November issue of Overhaul & Maintenance featured PolyGone 300-AG Gel in its new products section on page 68.
11/04: RPM Technology began development of a gelled formulation of PolyGone 500. This product is expected to have the same properties as the PolyGone 300-AG Gel.
10/04: RPM Technology began development of a gelled formulation of the PolyGone 535. This product is expected to have the same properties as the PolyGone 300-AG Gel.
09/04: RPM Technology teamed up with Willmar Air Service to exhibit at the 2004 Mooney Aircraft Pilots Association (MAPA) show in Chattanooga, TN.
05/04: RPM Technology announced the new PolyGone 300-AG Gel. This is a gelled version of the PolyGone 300-AG (previously GenSolve 530-AG)
05/04: RPM Technology exhibited at the 2004 Off-Shore Technology Show in Houston, TX
05/04: RPM Technology announces the PolyGone line of solvents to replace the GenSolve name.
04/04: RPM Technology presented the PolyGone line at the SAE Spring 2004 AMS Aerospace Sealing Committee Meeting (AMS G-9) in Seattle, WA.
04/04: RPM Technology established an exclusive marketing agreement with General Chemical to market and sell the GenSolve product line.