RPM Technology, LLC

Lab Notes > PG 300-AG Comparison
 

Product Comparison Testing

PolyGone 300-AG

 

The information below is a side-by-side comparison of PolyGone 300-AG versus 6 other "competitive" products.  The test was conducted by lowering weighed coupons that were coated in polysulfide sealant into glass containers with a measured amount of product. At the end of each hour, the coupons were removed, wiped and weighed.  Since the coupon weight and sealant weight differed slightly, the numbers were normalized and converted to percentage of material removed for direct comparison purposes.

 
  RPM Technology "Competitors"

 

 PolyGone 300-AG "A" "B" "C" "D" "E" "F" "G"
Odor Slight Ammonia Sweet Sweet Sweet

Very

Offensive

 Slight Sweet Slight
HMIS/ NFPA

H - 2

F - 2

R - 0

H - 2

F - 1

R - 1

H - 1

F - 0

R - 0

H -

F -

R -

H - 2

F - 1

R - 0

H -

F -

R -

H - 3

F - 3

R - 3

H -

F -

R -

FP, °F >160°F 216°F 216°F °F °F °F 120°F °F
1 hr 36% 25% -11% -4% 49% -9% -4% -3%
2 hr 80% 38% -14% -4% 100% -18% -2% -2%
3 hr 100% 38% -18% -4% N.A. -27% 6% 9%
                 
Notes:

Weight always decreased.  PolyGone chemically reacts to remove polysulfide

 

Product non-Hazardous, ships

Ground & Air

 

Product Hazardous, ships

Ground Only 

 Negative number indicates coupon absorbed solvent material and did not remove sealant Negative number indicates coupon absorbed solvent material and did not remove sealant

Product contains Methylene Chloride

(carcinogen)

Negative number indicates coupon absorbed solvent material and did not remove sealant

Negative number indicates coupon absorbed solvent material and did not remove sealant

Negative number indicates coupon absorbed solvent material and did not remove sealant

Intermediate viscosity, neither liquid or gel.

Go to PolyGone 300-AG Technical Data Sheet

Date issued: 6/06